RothDock: For iPod/iPhone - Wireless Dock/Receiver

Stream your music from room to room wirelessly while charging your iPod/iPhone.

Place your iPod/iPhone into the dock and play your music wirelessly via 2.4GHz direct to your hifi system (while the iPod/iPhone charges).

Have your iPod/iPhone right by you so that you can see the screen and select tracks, etc. and if the iPhone rings, the music will fade and you’ll hear the ring through the hifi system.

The dock also has auxiliary 3.5mm input so you can also use a music-enabled mobile phone, MP3 player etc.

SiMPLE. CONVENiENT. EFFECTiVE.

JUST RELEASED:  Now you can add an additional receiver to your RothDock system – in fact, you can add as many receivers as you like and stream music to multiple rooms.  The new REC1 Receiver for RothDock is available from September 2009.

Having trouble setting up your wireless at home - read this handy guide.

Buy This Product From:

Main Features

• Built-in iPod dock - Compatible with all iPods with 30-pin connectors  / iPhone 2G and 3G
• Additional 3.5mm stereo input for MP3/Mobile Phones, etc. on Dock
• 3.5mm stereo jack / 2x RCA audio Output on receiver

Dock Main Features

• Transmission Power: 20mv
• Operating Frequency Band: 2.4GHz
• Frequency Response: 20Hz – 20KHz
• Compatible with all iPods with 30-pin connectors / iPhone 2G and 3G
• Additional 3.5mm stereo input for MP3/Mobile Phones, etc

Receiver Main Features

• Audio Output: 3.5mm stereo jack / 2x RCA
• Transmission Distance: 10m
• Frequency Response: 20Hz - 20KHz

iPod / iPhone Compatibility

Specifications

• Power Output: 13W x 2
• Frequency response: 20Hz~ 30KHz
• T.H.D: < 0.5%
• S/N ratio: > 90dB
• Input impedance: 100Kohm
• Output impedance: 8ohm
• AC Input: 110V/230VAC Selectable, 50Hz/60Hz
• Power Consumption: 50 V/A
• Tube Type: 12AX7 x 2, 12AU7 x 2 MOS FET
• Input Selectors: iPod, CD, MP3
• Dimension: 187 (L) x 174 (W) x 108 (T) mm
• Weight: 1.8 Kg (Amplifier only)